Øvrige fra nyhedsbrev 2

Nedenstående profiler er publiceret i det nyhedsbrev, der er udsendt til medlemmer af Virksomhedsforum.

Hvis du har yderlige spørgsmål til dem, eller du ønsker at få din egen profil publiceret i hele verden, kontakt da Henrik Sørensen på hso@aalborg.dk eller 9931 1539

08 GR 49Q1 0ISY

Innovative products/techniques related to marine accessories and/or safety equipment

A well-established company working in the marine sector and dealing with marine equipment and accessories is interested in reviewing innovative products. The company is looking for a commercial agreement with extended technical assistance. The products should comply with European and National regulations.

08 ES 25E2 0J0Y

Valorisation of chrome tanned leather shavings and trimmings

A Catalan technical centre based in Spain has developed a technology for the valorisation of chrome tanned leather shavings and trimmings to obtain hydrolysed protein and chrome liquor by chemical hydrolysis. The hydrolysis system is designed to obtain a good separation between sludge and liquid. They are looking for a further development of the process and materials or to license the procedure.

08 PL 62AP 0JD4

Technology for wooden hollow bricks production with thermal refill.

A Polish large enterprise acting in the wood processing sector is seeking a technology for wooden hollow bricks filled with thermal material. The Company is interested in commercial agreement with technical assistance with an SME or R&D institution.

08 PL 63AW 0J3B

A novel method of obtaining elastomer nanocomposites

A West Pomerania University of Technology developed a method of obtaining elastomer nanocomposites in the way of synthesis, not through extrusion moulding. All of the obtained materials characterizes perfect elasticity, durability, often transparency. The University is interested in license agreement and technical cooperation.

08 PL 62AS 0JCA

Asphalt profiler for road levelling

A Polish SME that specialises in road maintenance is looking for innovative asphalt profiling machine. The machine will be used for levelling and smoothing the surfaces of public roads that are devastated by excessive road transport. The company is looking for commercial agreement with technical assistance.

08 PL 62AS 0JC7

Mobile crane for loading/unloading industrial machines

A Polish SME that renders transportation services in the industrial sector is looking for a crane for loading/unloading industrial machines and placing them in the right spot in a factory. The crane has to be fully mobile and transport object as heavy as 30 tons. The company is looking for commercial agreement with technical assistance.

08 NL 60AH 0IR4

A new method for chemical anchoring; know how about 2-component systems

A Dutch SME is specialized in the Design & Manufacturing of Production Equipment. One of the activities focusses on chemical anchoring, with applications in the construction industry.
They developed a concept for handling 2-component ingredients. They are looking for partners with expertise in 2-component materials for joint further development.

08 GB 47P8 0J02

Integrated systems for defence and security applications

A North East of England based SME have developed a technology to detect small molecules such as drugs, toxins and explosives. They are looking to find a manufacturer, ideally in the defence or security sector, who would be interested in R&D collaboration to further develop this technology.

08 GB 47P8 0J04

End user of defence/security applications

A SME in the North East of England have developed a technology to test for small molecules such as toxins and drugs and are looking for an existing end user of such equiment in the defence/security sector to carry out further testing of product.

08 AT 0105 0J6L

Printing technology that can print various substrates with high speed

An Austrian printing-company is looking for a printing system that can be integrated in existing continuous-form printing machines. The system should print on various substrates (carbonless-paper, coated paper, foils, plastic-cards), have a variable speed (depending on the speed of the printing machine, but at least 150 meters per minute). The printing quality should be at 600x600 dpi. The colour of the print must be as black as possible. Companies and/or R&D partners are sought.

08 IT 53U6 0JD1

Innovative system for CDs and DVDs label printing.

An Italian SME, specialized in the duplication of CDs and DVDs, is looking for an innovative system able to print labels with better productive performances. The systems, currently used, have technical problems during the printing of labels (smudges, solubility, low resolution…), that cause an increase of printing times and production wastes. The company is looking for a solution, based on the “ink jet technique”, already on the market to negotiate a license agreement.

08 FR 37M3 0IWK

Battery for electric bicycle – technology and cooperation for development

A French company, with a long experience in the field of bicycles, is willing to develop and produce electric bicyles. The compagny is seeking partners with knowledge and know-how in battery, as a supplier or as a partner for technological development.

08 LV 58AD 0J35

Deodorant stick type plastic container

A Latvian company, is looking for a partner that can help to develop and produce deodorant stick type plastic containers. The interior surface of these containers must meet food product packaging EU regulations. The product should be laboratory tested and ready for use. On the first stage of cooperation the company is looking for partners that can provide such containers in requested amounts.

08 LV 58AD 0J1O

An appliance for determination of shear displacement of rigid plastic foam and other porous materials.

A Latvian research institute has developed a technology and an appliance for determination of shear displacement of rigid plastic foam and other porous materials. An advantage over the presently used methods includes determination of shear displacement directly on a flat, parallelepiped sample, with a changeable measurement base length and height. The institute is looking for licensing or technical cooperation with an industrial or research partner for further development of the technology.

08 GB 43O3 0J8B

Nano scale Si02 ( liquid glass) superphobic ultra thin coatings

A UK company offers Sio2 (Silicon Dioxide) surface treatment for almost all surfaces including fabrics, metals, ceramics, plastics and skin. This technology uses nano scale layering to coat the surface of a fabric or substrate to provide a superphobic and highly durable barrier to soiling, abrasion and corrosion. Partners for commercial agreements, licensing and technical cooperation are sought

08 FR 32j2 0JAI

Micromanipulation platform to handle micro-objects

A French laboratory has developed a micromanipulation platform which enables micro-handling of micro-objects, pick-and-place and assisted micro-assembly. It is looking for technical agreements with industrial partners.

08 IT 55W4 0JC5

A compact machine for packaging

An Italian company has developed and produced a vertical packaging machine with the following features: agility, quality of materials, and design. Its output capacity reaches 30 packages per minute. The company is looking for partners for a commercial agreement with technical assistance.

08 IT 55W4 0JC4

Packaging machine for large formats

An Italian company has developed a packaging machine for large formats. It is suitable for producing high weight and volume packages: from 2 to 60 kg. It has a system for supporting and unloading the package on the outfeed conveyor belt. Materials thickness values up to 250 micron, in pillow and/or square bottom versions, with or without handle. The company seeks partners for a commercial agreement with technical assistance.

08 SE 67CC 0J2X

Flexible core panel for sandwich products

A southeast Swedish SME has developed a flexible core panel. Many products are made of boards or panels with different kind of core material for isolation or to support the structure in a sandwich-construction. The SME is offering a 3D-flexible corepanel which with its flexibility can support structures which are convex and concave. The partner sought for is an industrial company for licence or venture agreement interested in testing new applications.

08 SE 67CJ 0JA7

High-speed non-stop train

A small Swedish company has invented the idea of a high-speed non-stop train. It should provide a faster, cheaper and more environmentally friendly transportation of passengers and goods in Europe. The high-speed train should go with max speed from start to terminal station. Certain motor coaches with passengers and goods could be connected and disconnected at full speed at the stations in between. The inventor is looking for commercial agreement with technical assistance.

08 PL 63AW 0IWC

Microprocessor based power measuring instrument

A reaserch institute from north-west Poland prepared a project of microprocessor-based power measuring instrument that enables measurement of active power, reactive power as well as voltage and frequency in a very wide range. Help in further developement and introduction to the market is sought.

08 PL 62AP 0J72

Durable and elastic insulation coating for toroidal transformers

A Polish SME is looking for a deposition technology of durable and elastic insulation coating for inductive elements in toroidal transformers. The potential partner should have experience in coating deposition using various coating materials on different surfaces or be a producer of toroidal transformers. The company is looking for partners willing to sign a commercial agreement with technical assistance or cooperate within the 7th Framework Programme for RTD.

08 GR 49R2 0JBD

Development of Polymer Nanocomposites using Carbon Nanotubes as Additives

A Greek spin-off active in the synthesis of high-purity carbon nanotubes (CNTs) is seeking technologies (either at laboratory stage or fully developed) for the development of carbon nanotubes-based composites for high-strength applications with a polymer (e.g. thermoplastic) or a ceramic material matrix. The technologies requested should ensure uniform dispersion of the carbon nanotubes throughout the matrix. Industrial and research partners for technical and commercial collaboration are sought.

08 IT 55W4 0JBJ

Vertical packaging machine for the production of a very wide range of package

An Italian company has developed and produces an alternated vertical packaging machine for the production of a very wide range of package. It is a high ranging machine in its category, able to make up to 120 packages per minute. With a broad range of applications and suitable for resolving complex problems, it is easy to use, thanks to its simplicity and mechanical sturdiness and to higher level electronics. The company seeks partners for a commercial agreement with technical assistance.

08 GR 49R2 0JB0

Production of high-purity and low-cost multi-wall carbon nanotubes

A Greek spin-off company specialises in the production of multi-wall carbon nanotubes (MWNTs) by catalytic chemical vapour deposition. Advantages over commercial carbon nanotubes include the high purity and low cost of the as-prepared materials. Carbon nanotubes find applications in several sectors, such as nanocomposites, energy, electronics, biological applications and sensors. They are seeking industrial and/or academic partners for technical and/or commercial collaboration.

08 SE 67BY 0J0V

Advanced Technical textiles tapes and cores, woven or braided.

A Swedish SME within the textile tapes and core manufacturing activities is offering advanced technical textiles for applications such as: industrial, medical, personal protection, automotive, sports etc. Advance properties for the textiles are among others flame-proof, conductive, water repellence. The company is now looking for industrial partners for development of new applications or commercial agreement with technical assistance.

08 SE 67BY 0J8J

Unmanned Aerial Systems (UAS’s) with Autonomous Helicopter

A Swedish SME has developed Unmanned Aerial Systems (UAS’s) including an autonomous helicopter. The UAS’s are light weight, easy to use and can perform commercial as well as military missions that are too "dull, dirty, or dangerous" for manned aircrafts. The company is looking for industrial or military partners for commercial agreements and technical cooperation.

08 BE 0213 0J9J

Biological cleaning and degreasing base for a broad range of industrial & domestic applications

A Belgian SME offers a natural cleaning & degreasing base made of algae extracts. This product can be diluted or formulated according to customers’ needs for numerous cleaning & degreasing applications in the industrial and domestic sectors. This product is as effective as other cleaners or degreasers available on the market while being cheaper and totally natural. The SME looks for commercial agreements with technical assistance with partners active in the cleaning and degreasing sectors.

08 IT 55W4 0JB3

At distance calibration and monitoring of diffractometers calibration

An Italian SME is active in the development of measure methods of X-ray diffraction. The satisfaction of the need of comparing data results between labs is realised by samples and specimens dedicated to calibration standards, diffractometric calibration for specific applications in the field of characterisation and diagnosis of different sofistication level materials and diffractometers calibration monitoring. The company is looking for partners for technical cooperation.

08 IT 55W4 0JAX

X-ray diffractometer for analysis diagnosys and characterisation of materials

An Italian University spin-off has developed and patented an X-ray diffractometer for analysis diagnosys and characterisation of materials. The prototype has the capability of movement until six grade of freedom with a pointing device controlled by a optical visible system (i.e. camera and laser) and with a distance control for the operation of pointing and measure. The company is looking for partners for technical cooperation for adaptation to specific needs.

08 NL 60AH 0J6J

Development of High Temperature TGA Furnace

A Dutch SME is a manufacturer of laboratory instruments. A major domain of activity is thermal analysis, a group of analytical techniques where the properties of a material are determined as a function of temperature. For one of these instruments, a TGA (“thermo gravimetrical analysis”), the company wants to expand the current maximum temperature from 1100 °C up to 1600 °C. The company is looking for a cooperation to realize this new high temperature furnace application.

08 GB 41n8 0J89

Ultra High Resolution Infrared Camera and Software for Very High Temperature Industrial Monitoring

A UK company has launched a rugged ultra high resolution infrared camera for rotary cement kilns. It allows for monitoring cement kilns and coolers with very high quality and user-friendliness. Companies in (or selling to) cement industry and elsewhere where kilns and furnaces and coolers are found, are sought for commercial agreements with technical assistance.

08 GB 41n8 0JAT

A Shutterless Miniature Thermal Imaging Camera

A UK company has launched an ultra light high resolution infrared camera for the defence, surveillance and other sectors. It allows for vision in complete darkness. The camera comes in a series of different configurations. OEM partners and system integrators are sought for technical, commercial and licensing deals.

08 GB 77dz 0J3L

Micro Recessed Air Bearing

A UK company, with considerable experience in aerostatic bearings, has developed radial and axial micro-recessed aerostatic bearings which will offer improved performance over existing products by providing increased static stiffness and reduced friction compared to conventional designs. A partner is sought to develop this technology with a number of collaboration types offered.

08 GB 41n8 0J6B

Ceramics and other inorganic materials and enabling technologies with high resistance to heat, corrosion and abrasion

The UK branch of a multi-national company is looking for early-stage materials and technologies in the field of ceramics and other inorganic materials. Features most of interest are high resistance to heat, corrosion and abrasion. The offerings should be protected or protectable. They may be in early stage as the company has the resources for further development and commercialisation on a global scale.

08 GB 41n8 0J5A

Novel release agents/die lubricants for high pressure die casting

A large UK foundry products company is searching for innovative high temperature release agents/die lubricants for high pressure die casting of non-ferrous (e.g. aluminium) components. Strong IP is demanded. The type of collaboration may vary but could include both licensing and outright purchase.

08 PL 62AP 0J4E

Chemical methods of metal protection from paint during painting

A Polish enterprise is seeking an innovative technology to protect metal from paint during wet painting. The technology should involve chemical means. The technology should be adjusted to construction elements of agricultural machinery. The company is interested in commercial agreement with technical assistance with an SME.

08 SE 67CG 0IS3

Canvas, leather or textile with special requirements (friction, durability, environmental)

An SME from Northern Sweden is developing a training product for martial arts and group training. The main purpose of this product is to glide against the floor and also work as a punching bag and the main characteristic is friction and durability. The company is looking for a partner developing and producing special canvas, leather or cloth, for cooperation in enhancing the characteristics of the training product.

08 FI 30I2 0J8E

Portable probe measuring peat properties for field use

A small Finnish company has developed a portable peat probe instrument for field use. The probe is a quick, portable and it can be used as a handheld instrument in the field. The company is looking for industrial partners interested in further development and in research institutes and companies for testing of new applications.

08 FI 30I2 0J8D

Portable instrument for measuring the density and liquid water content of snow

A Finnish company has developed a portable instrument for measuring the density and liquid water content of snow. The instrument is explicitly designed for field use; it is light, quick and easy to use. The company is looking for industrial partners interested in further development, and research institutes and companies for testing of new applications.

08 FI 30I2 0J8F

Portable impulse radar for short-range detection of sub-surface objects and interfaces

A Finnish company has developed a high-resolution impulse radar for short-range detection of sub-surface objects and interfaces. The impulse radar is small-sized, portable and it can be used as a handheld instrument in the field. The company is looking for industrial partners and research institutes interested in further development, especially image processing and testing of new applications.

08 FR 32j2 0J78

New seal for packaging of various boxes and containers

A French SME has patented an innovative solution allowing to seal two caps or tops on a unique container. The company is looking for industrial partners from various fields interested in a licence.

08 FR 32j2 0J6E

Request for a porous material able to replace aluminium

A French engineering company is looking for a material solution able to replace aluminium. The company is interested in technical cooperations or manufacturing agreements with industry or technical centers.

08 FR 32j2 0J6D

Request for an aluminium drilling or machining technology

A French engineering company is looking for industrial partners able to propose a technology for aluminium drilling. The company is interested in manufacturing agreements with industry or technical centers.

08 FR 32j2 0J7V

Ultrasonic micro-machining for hard, brittle and non conductive materials

A French SME has developed specific know-how in ultrasonic micro-machining well adapted to precise machining of hard, brittle, non-conductive materials. The company is interested in manufacturing agreements with technical assistance and technical cooperation with industrial partners.

08 FR 32j2 0J7U

High precision 3D portable surface profilometer

A French manufacturer of standard and special high-precision surface metrology systems has developed a new portable surface profilometer that allows measurement of micro and nano surface geometry and 2D/3D surface texture. The manufacturer is looking for technical cooperation and marketing agreements with technical assistance.

08 FR 32j2 0J7R

Ultra high precision 2D/3D surface profiling systems with nanometric resolution

A French SME has developed a unique range of ultra-high precision 2D and 3 D profilometers for measuring surface texture (contact and non contact measurement) with nanometric resolution. These profilometers allow real time correction, minimise measurement uncertainty. The company is looking for technical cooperation.

08 FR 32j2 0J7D

New antimicrobial coating for medical implants or instruments

The French subsidiary of a German company has developed a new antimicrobial coating offering excellent biocompatible properties. It can be adapted to different kinds of materials. The company is looking for commercial agreements with technical assistance and for technical cooperation with industrial partners willing to integrate a antimicrobial coating for their products.